From XMTuner

[edit] IP Address

The TVersity IP address is the IP address of the machine running tversity. If its different from the machine running XM Tuner, it must be the IP address of the network card, such as 192.168.1.101. It is not detected for you.

If XMTuner and TVersity run on the same PC, you may also optionally, use the loopback address (also known as localhost) that refers traffic back to the local PC, 127.0.0.1.

You must also include the TVersity port number (Default is 41952) after the IP. Example: 192.168.1.101:41952 127.0.0.1:41952

Choose validate when you're done and XMTuner will check to see if it can contact TVersity running at the address you specified.

[edit] Feed

Once you validate the IP address and port, you may have XMTuner add the feed to TVersity automatically for you, by pressing the add feed button. Once added, you can refresh the feed (which is rarely needed to be done manually) to pick up new channels or fix a broken list, by clicking the refresh button in XMTuner or through the TVersity UI

[edit] Configuration Check

XMTuner will automatically check your TVersity configuration for common issues and recommend fixes for them. Currently the issue checked for is the Max Items per Feed setting, which defaults to 20, which is too low for the number of channels provided in the XMTuner feed. To view the whole list, you need to change the value to be 0 (unlimited, recommended setting) or a suitably high enough number.